What does weekly pool service include? A visit checklist
A weekly pool service usually includes testing and balancing the water, skimming debris, brushing walls and steps, emptying skimmer and pump baskets, vacuuming when needed, and a quick check of the equipment. Repairs, deep filter cleans and algae treatment are often extra. Because there is no single national definition, write down what your visit covers so customers and technicians agree.
A typical weekly visit
| Task | Usually included | Often priced separately |
|---|---|---|
| Test and adjust chemistry | Yes | Major corrections such as shock after a storm |
| Skim surface | Yes | Heavy leaf removal |
| Brush walls and steps | Yes | Algae removal |
| Empty skimmer and pump baskets | Yes | n/a |
| Vacuum | Often, or as needed | Green-to-clean recoveries |
| Check pump, filter pressure, visible leaks | Yes, as an observation | Repairs and parts |
| Filter clean | Sometimes on a schedule | Deep clean or media replacement |
| Report to customer | Varies | n/a |
This table describes common practice, not a standard. Your service agreement should list what is included.
If you are the operator, copy the Included column into your agreement. If you are the customer, ask for it. Either way, vague wording such as "full service" is where most misunderstandings begin, so name the tasks and the visit day.
What the chemistry check covers
At minimum, free chlorine and pH, then alkalinity, cyanuric acid and temperature on a regular basis. The CDC recommends keeping pH between 7.0 and 7.8 and free chlorine at least 1 ppm in pools; the pool chemical levels chart has the numbers. A once-a-week test is a snapshot. The CDC advises testing chlorine and pH at least twice per day for pools in regular use, so customers with heavy use may need to test between visits.
Seasonal and weather adjustments
A standard weekly visit changes with conditions. After a storm, expect extra debris, a possible chlorine demand spike and a longer visit. In hot weather, chlorine is used up faster and algae grows quicker, so readings may need more attention. In shoulder seasons, some customers reduce the visit to every other week or close the pool; agree this in advance rather than assuming. If a pool is covered or unused, you may only need testing and basic checks.
Whatever the season, write down what you did. A note such as "post-storm: extra debris, added chlorine after testing, rechecked next visit" tells the customer why the visit took longer and why a one-off charge applies.
What customers should be told
- What is included and what is extra, in writing.
- The day your visit usually happens, and what to expect if it rains.
- Who to contact between visits.
- That a reading is a snapshot of the moment you measured.
Questions customers commonly ask
- Will you come if it rains? Many operators do, because light rain does not stop testing and basket checks; heavy storms and lightning are a safety reason to reschedule.
- Do I need to be home? Usually not, as long as access to the pool area is agreed and pets are secured.
- What if the water goes green between visits? Ask the customer to message you; recovery is usually quoted separately.
- Who pays for repairs? Repairs and parts are generally separate from the routine visit price. Record the observation, offer a quote and let the customer decide.
- How do I know the work was done? A photo and short report after each visit answers this without a phone call.
Answering these in a short written service agreement at the start prevents most of the awkward conversations later.
A checklist you can copy
- Arrive and check the gate is secured behind you
- Test free chlorine and pH, then alkalinity and cyanuric acid on your usual schedule
- Adjust chemistry and record what you added
- Skim, brush and vacuum as needed
- Empty skimmer and pump baskets
- Glance at pump, filter pressure and visible plumbing
- Take a photo if something needs the customer's attention
- Record the visit and send the report
Printing this list and keeping it in the truck is enough for a first month. If you move it into an app later, PoolDocket supports a reusable checklist inside each visit record, so every stop follows the same steps.
Showing your work
The easiest way to avoid the question "what do I pay you for?" is a short report after each visit: what you measured, what you added, what you did, and anything needing attention, with a photo where it helps. The pool service report template shows the fields.
In PoolDocket you can record these on your iPhone or iPad at the property, with or without signal, then generate a PDF report with selected photos and share it with the iOS share sheet. The free plan covers up to three active pools.
How often should a pool be serviced?
Weekly is the common residential interval. Pools with heavy use, trees, or hot weather may need more; lightly used or covered pools sometimes less. The right interval is whatever keeps water within the target ranges between visits, which your own logged readings will show. See the pool service log sheet guide for a simple way to track that.
Frequently asked questions
What does a weekly pool service include?
Usually water testing and balancing, skimming, brushing, emptying baskets, vacuuming when needed and an equipment check.
Is chemical cost included in weekly pool service?
It varies. Some operators include routine chemicals and charge extra for corrections; confirm in writing.
How often should a pool be serviced?
Weekly is common for residential pools, adjusted for use, weather and trees.
Can I send customers a report after each visit?
Yes. PoolDocket generates a PDF service report that you share through the iOS share sheet.
Related guides
Pool service app · PoolDocket on the App StoreRecord your next visit with PoolDocket.
Free for up to three active pools. Optional monthly and annual PoolDocket Pro subscriptions.
Download on the App Store