Ideal pool chemical levels chart (with CDC minimums)
The ideal pool chemical levels for a chlorinated pool are free chlorine of at least 1 ppm (2 ppm if you use cyanuric acid), pH between 7.0 and 7.8, combined chlorine under 0.4 ppm and cyanuric acid at or below 90 ppm. Total alkalinity and calcium hardness have no CDC number, so industry ranges are used. The chart below separates what the CDC and the Model Aquatic Health Code (MAHC) say from what is common trade practice.
The chart: target ranges at a glance
These are operating limits, not magic numbers. The first four rows come from the CDC's 2024 MAHC inspection cheat sheet and its home pool guidance. The last two rows are widely quoted industry ranges and are labelled as such.
| Parameter | Pool | Hot tub / spa | Source type |
|---|---|---|---|
| Free chlorine | 1 ppm minimum; 2 ppm if cyanuric acid is used; 10 ppm maximum while open | 3 ppm minimum | CDC / MAHC |
| pH | 7.0 to 7.8 | 7.0 to 7.8 | CDC / MAHC |
| Combined chlorine | Below 0.4 ppm | Below 0.4 ppm | MAHC |
| Cyanuric acid (CYA) | 90 ppm or less | CDC advises against using it | MAHC / CDC |
| Total alkalinity | 60 to 180 ppm as CaCO3 in the public-pool standard; many technicians aim lower in that band | Same band is commonly used | ANSI/APSP/ICC-11 (2019), as cited by trade press |
| Calcium hardness | 200 to 400 ppm is the commonly quoted ideal; 150 ppm is cited as a minimum | Commonly the same | Industry practice |
Bromine pools and spas have separate minimums in the MAHC cheat sheet (3 ppm for pools, 4 ppm for spas). Always check whether your city or county has adopted a stricter code than the MAHC, which is a model and not a law on its own.
Free chlorine and pH: the two numbers that matter every visit
The CDC says to keep pH at 7.0 to 7.8 and free chlorine at or above 1 ppm in pools and 3 ppm in hot tubs. Cyanuric acid slows chlorine loss from sunlight but also slows disinfection, which is why the minimum rises to 2 ppm when it is present. The MAHC also treats a CYA-to-free-chlorine ratio above 45:1 as a closure-level problem for public venues.
For public pools the MAHC sets closure-level triggers at pH below 6.5 or above 8.0, and says free chlorine must not exceed 10 ppm while bathers are present. Residential and route customers are usually not inspected like that, but the same limits make a sensible safety ceiling and floor when you write notes.
The CDC also recommends DPD test kits as the most accurate option and warns that very high chlorine (above 10 ppm) can read falsely low or zero on some tests, so follow the kit instructions.
Alkalinity, calcium hardness and CYA: balance, not disinfection
Total alkalinity buffers pH. If it drifts low, pH swings quickly; if it drifts high, pH tends to creep upward and resist correction. Calcium hardness protects plaster and heat exchangers: water that is too soft can etch surfaces, water that is too hard can scale.
The 2019 public-pool standard is reported to set total alkalinity at 60 to 180 ppm, and calcium hardness guidance commonly quoted by the trade is 200 to 400 ppm. A 2026 revision of that standard now exists, so confirm figures against the current text or against your pool builder's instructions for the specific surface (plaster, vinyl, fibreglass) before treating any range as fixed.
How often to test
The CDC says to test chlorine and pH at least twice per day for pools and hot tubs that are in regular use, and more often when many people are swimming. A weekly service visit cannot replace that, which is worth saying plainly to a customer: your reading is a snapshot from one moment, not a guarantee for the following six days.
Typical items to record at each visit are free chlorine, pH, total alkalinity, cyanuric acid and water temperature. Calcium hardness is usually checked less often, for example monthly or when scale or etching appears. Pick a schedule, write it down, and apply it to every account.
Logging readings so they are useful later
A chart is only half the job. The part customers and your future self need is the history: what the pH was last Tuesday, whether it has been creeping up for three weeks, and what you added in response. Record the number with its unit, the date, which body of water it belongs to, and the treatment you applied. Leave a field blank if you did not measure it rather than copying last week's value.
See the pool service report template for a visit record layout, and the pool service log sheet guide for a simple paper version.
Recording readings in PoolDocket
PoolDocket lets you record configurable readings such as pH, sanitizer, alkalinity and temperature, alongside treatments, issues and photos, on iPhone or iPad. Records are saved on the device, so you can complete a visit without signal. The app records what you measured and did. It does not calculate doses, recommend treatments or certify that water is safe.
Sources
Frequently asked questions
What is the ideal pH for a swimming pool?
The CDC recommends a pH of 7.0 to 7.8. Many technicians aim for the middle of that band because chlorine works better and swimmers are more comfortable there.
How much free chlorine should a pool have?
At least 1 ppm according to CDC guidance, or at least 2 ppm if the pool uses cyanuric acid. Hot tubs should have at least 3 ppm.
What is the maximum cyanuric acid level?
The MAHC operating limit is 90 ppm, and it treats a ratio of cyanuric acid to free chlorine above 45:1 as a closure-level problem for public pools.
Does PoolDocket tell me how much chemical to add?
No. It records the readings you take and the treatments you apply. It does not give dosing advice.
Related guides
Pool service app · PoolDocket on the App StoreRecord your next visit with PoolDocket.
Free for up to three active pools. Optional monthly and annual PoolDocket Pro subscriptions.
Download on the App Store