Guides

How to price pool service: a method that covers your costs

By Eutopix Labs P.S.A. · Published 20 November 2026

To price pool service, work out what one visit costs you in time, chemicals, driving and overhead, multiply by the visits in a month, add the margin you need, and compare the result with what local customers pay. Then check each account against your records, because the same price can be profitable at one pool and a loss at another. A worked example is below.

Start from your own costs, not from a number you heard

Prices vary a great deal by region, pool size and what the visit includes, and this guide does not list a market price. Your price has to cover your costs and pay you, and it has to be one customers in your area will accept. Do the first part yourself, then check the second.

Define the service first. Price one defined visit, for example the tasks in the weekly service checklist, and treat everything else as extra.

The five costs in one visit

A worked example

The figures below are invented to show the method. Replace them with your own.

ItemPer visit
On-site time: 40 min at 30 per hour20.00
Travel time and fuel6.00
Chemicals (average of recorded visits)5.00
Overhead share (insurance, tools, phone)3.00
Cost per visit34.00
Margin target 25 percent on top8.50
Price per visit42.50
Monthly price at 4.3 visits182.75

Weekly service has about 4.3 visits in an average month (52 weeks divided by 12), so use that number rather than 4. Round the price to a figure you can explain, and write down what it includes.

Then compare with what other operators near you charge, using their published rates or quotes. If you are far above, check that your time estimate is realistic. If you are far below, you are probably missing a cost.

Adjust for the pool, not only the visit

Some operators use a price per pool; others add a surcharge for size or features. Whichever you choose, apply it the same way to every customer so the logic is easy to explain.

Check the price against your records

A price is a forecast. Your visit records show whether it was right. Add up the service amount and the chemical cost recorded for each account over a month or a quarter, and look at the difference. The account margin guide walks through that comparison with a worked example.

If an account runs low, you have three honest options: raise the price, reduce the scope or accept it for a reason such as a good neighbouring stop. Make the choice on purpose, using the numbers.

Raising prices on existing customers

Costs rise, and a price set two years ago may no longer cover them. Raise prices on a schedule rather than in a panic, and tell customers in writing with notice, such as 30 days. Give the reason in one sentence, for example higher chemical and fuel costs, and state the new monthly amount and the date it starts.

Raise accounts unevenly if your records justify it. The accounts with the lowest margin are the first to review, and an account that is hard to service or far from your route may need a larger change than one next door to three others. Expect that a few customers will leave; check the margin of those accounts first, since losing a low-margin account can cost you little.

Keep the change simple. A short message, a clear date and an offer to explain by phone are enough. Avoid hidden fees, which customers notice and resent more than an honest increase.

Where PoolDocket helps, and where it does not

PoolDocket records the service price on each visit and the cost of the chemicals you add (product, quantity and cost), and shows an estimated gross margin by account in its insights. That gives you the data for the check above. It also shows the recurring stops for each weekday, so you can see how many accounts a day holds.

The app does not recommend prices, benchmark you against other operators, track driving time or distance, or give chemical dosing advice. Margin figures use what you enter, so they leave out your time, travel and overhead unless you account for them yourself. Use the worked method above for those.

Frequently asked questions

How much should I charge for weekly pool service?

It depends on your region, the pool and what a visit includes. Work out your cost per visit, add a margin and compare with local rates rather than copying a number from another market.

How many visits are in a month of weekly service?

About 4.3 on average, from 52 weeks divided by 12. Some months have five visits.

Should chemicals be included in the monthly price?

Many operators include routine chemicals and bill special treatments such as algae recovery separately. Whatever you choose, state it in your agreement.

Can PoolDocket tell me what to charge?

No. It records your service price and chemical costs per visit and shows estimated gross margin by account, but it does not suggest prices.

Related guides

Pool service app · PoolDocket on the App Store

Record your next visit with PoolDocket.

Free for up to three active pools. Optional monthly and annual PoolDocket Pro subscriptions.

Download on the App Store